LED Mining Cap Lamps
hazardous area lights

Best Safety Features for LED Mining Cap Lamps

In mining sites, individuals rely on some types of equipment more than others. For mine safety, illumination and general tasks around the combustible area, miners use led mining cap lamps. This type of traditional mining equipment includes a powerful light head at the center of the hard hat. Over time, updated designs have made mining hat lights safer and more usable.

Improving Detection and Visibility

Visibility is top priority in mining locations. In order to ensure clarity during operations, modern mining headlamps are equipped with optional colored modes, as some colors improve detection when smoke or fog is present in the surrounding environment. Amber is a common light color that is applicable to safe illumination in mining sites.

An emergency strobing feature is also an essential mode in LED mining hats. With the push of a button or switch, mining operators can turn their mining cap into an emergency beacon. Such features are critical during evacuations and signaling. Individuals no longer have to carry around a separate strobe light for emergencies.

Some LED mining fixtures on helmets come with a secondary light, located at the back of the cap. The lamp serves as a safety light, which is useful for detection in dark parts of the site. This light can be red or flashing for streamlined detection.

Maximum Convenience

For fast activation, LED mining caps may come with large, on/off push buttons. This allows operators to turn the unit on, even with gloved hands. Non-slip grips and textures may boost such properties on the light.

A spotlight/floodlight combination feature may also increase functionality in LED mining lamps. In application, an individual can illuminate far-flung targets using the spotlight beam, which is applicable when navigating in and around tunnels. Floodlight features are useful for wide-area illumination, especially during detailed tasks and monitoring.…

Continue Reading

LED Mining Lights
hazardous area lights

What is MSHA Guidelines for LED Mining Lights

Mining is a very dangerous, high-risk activity with the potential of large gains and profits. To minimize hazards associated with the industry, a special organization was created. Called the Mine Safety and Health Administration (MSHA), the agency ensures mining operations in the US are carried out safely at all times. The organization set the standards related to LED Mining Lights, among other things.

MSHA 101

MSHA helps establish various safety guidelines for industrial mining operations. The government has given the agency a lot of power, in order to implement their objectives. For instance, under MSHA, mining sites require two inspections on a yearly basis.

Moreover, under an Open Search Warrant scheme, which pertains to all mines based in the country, MSHA representatives can inspect any parts of the location. Failure to adhere to periodic inspections will result in a fine worth roughly $50,000, as well as the presence of Federal Marshalls.

Perhaps the biggest display of power that an MSHA representative has over US-based mines is the ability to shut down or close a mine, without a supporting court order. Criminal penalties against the mining business can also be applied (by MSHA), in the event of accidents, including non-fatal accidents.

Based on the information above, it is important for mining operators to adhere to MSHA guidelines – not out of fear, but in order to hold up a certain level of safety in the location.

MSHA and LED Mining Lights

For LED mining lights, one of the best ways to ensure compliance with MSHA regulations is to purchase MSHA-approved mining lights. Most MSHA-approved units are explosion proof, which refers to safety mechanisms that contain ignitions within the luminary, so that it cannot interact with flammable elements in the environment.

According to MSHA 77.207 Illumination, the types of lights recommended for illumination in US-based mines include the following: fixed lighting systems, portable lamps and machine-mounted units.…

Continue Reading

food processing lights
hazardous area lights

NSF Zone Classifications for Industrial Food Processing Lights

The National Sanitation Foundation (NSF) governs the application of food processing lights for manufacturing facilities, as well as commercial kitchens. For lighting systems, the non-profit public health agency classifies certain food-related locations into the following categories: Non-food Zone, Splash Zone and Food Zone.

This article provides information about each NSF classification, under the NSF C-2 listing procedure.

Non-food Zone

Starting with non-food zone areas, this level of certification is for dry-processing locations, storage rooms and commercial kitchens. The lamps do not normally feature extreme resistance to high-pressure jets or corrosive cleaning agents. Therefore, the fixtures should not be used in sections of the facility that exposes the units to persistent washdowns. The possibility of contamination is also high with non-food zone lamps.

Splash Zone

This type of location in the facility does not regularly come in direct contact with food. Instead, the NSF-rated lamps are constantly exposed to splashes from washdown sessions. Because of this, food processing lights should be designed to withstand wet or damp locations (depending on the application). Glass lens is not typically used for splash-zone fixtures, due to the possibility of breakage, when exposed to high-pressure jets. The fixtures should also offer some form of corrosion resistance to deter cleaning solvents or agents.

Food Zone

Food zones, as the name of the classification suggests, are locations that handle consumable products, usually at their final stages of processing. It is important to highlight that materials for food zone fixtures can also be used in non-food zone and splash zone lights. Interestingly, other types of equipment can be found in this category, including chopping boards, industrial tables and conveyor systems that push food products to various sections of the establishment.

In addition to observing NSF classifications, food processing facilities must also adhere to FDA and USDA guidelines. To purchase hazardous area lighting fixture please visit http://www.larsonelectronics.com/c-154-explosion-proof-lights.aspx

Continue Reading