led work lights
Led Lights

Benefits of Energy Efficient LED Work Lights in Hospitals and Clinics

This article is sponsored by Larson Electronics lighting manufacturer out of Kemp, TX.

Some work locations and facilities can benefit from cutting-edge LED lamps more than others, such as hospitals and emergency healthcare buildings. In those facilities, lighting must cater to both professionals and patients. Furthermore, numerous led work lights are left activated for long periods of time, in some cases longer than 24 hours.

Lighting Levels, Performance and Glare

The required illuminative properties of LED lamps inside hospitals vary, depending on the activities conducted inside the rooms. For instance, in doctor’s offices and waiting areas, 150 lux is recommended. By comparison, locations in the building where work takes place must have more powerful illumination. First-aid wards, operating room tables and delivery beds inside maternity wards should have at least 5,000 lux and a maximum of 10,000 lux.

Glare should be carefully addressed in hospitals because healthcare professionals and patients spend long periods of time in specific rooms. The longer individuals are exposed to glare, the more such unwanted lighting effects tend to hamper general vision and work performance. Because of this, most LED fixtures in hospitals are equipped with a frosted lens or a glare-reducing component.

Types of LED Lights in Hospitals

Recessed LED panel fixtures are the most common types of LED work lights in hospitals. These systems are ideal for general rooms, lobbies, waiting areas, patient rooms, hallways and more.

Rooms where work is facilitated, which can include consultations, operations and administration of medical assistance, should utilize specific types of lamps. An example of this is an LED operating room lamp with an arm and swivel mounting component used for surgeries and general check ups.

In parking lots and outdoor sections of hospitals, LED street lamps mounted on poles can be installed in the area. For energy efficient operation, the powerful units could be equipped with motion sensors or timers for autonomous operation.


Continue Reading

red led lamps
Led Lights

Using RED LED Lamps to Preserve Night Vision

Preserving night vision at night is a common practice for tasks that are conducted in darkness. From military submarines and printing rooms to animal trackers and patrollers, red LED lamps are sometimes used to ease the transition and maintain clarity in low-light conditions.


Non-nocturnal animals rely on rhodopsin to facilitate night vision (not the same as night vision goggles). In low-light conditions, the chemical is produced rapidly by the merging of retinal and opsin molecules present in one’s eye. This process takes a short period to complete, resulting in temporary blindness for individuals coming from a bright environment to a dark one. After rhodopsin is produced, clarity is restored, which allows individuals to see with minimal lighting support.

Red light is used to preserve night vision, as the chemical is less sensitive to bands with long wavelength measurements. Exposure to red light does not cause reactions that reduce the creation of rhodopsin, which occurs when bright, white light (and other bright light colors) are present in the location.

RED LED Fixtures

There are several types of red LED lamps that can help preserve night vision in outdoor work sites, labs and during military projects. Red LED headlights are applicable for hunting, nighttime inspections and remote navigation. Control rooms and military submarines may utilize permanent red LED fixtures with a dual light mode for seamless transitions.

It is important to highlight that red lighting systems used to preserve night vision should be set at low light output settings. This is because high light output (regardless of the color) can decrease clarity in dark conditions.

Green and blue light is sometimes used to for increased distinction of colors and patterns at night. Applicable to map reading and control or briefing rooms, the colored lights help certain characteristics of the target stand out.…

Continue Reading

Led Lights

Why you should switch to LED lightbulbs right now before the law requires it

Are you still not using the LED spotlights in your home? Then you should consider switching to these lights before the law starts to require it. There are so many reasons why you shouldn’t wait to switch to these lights, that it is strange that there are still people that don’t have switched yet. These are some of the reasons why you should switch your lights to LED as soon as possible.

When the law requires it, these lights are going to become more expensive

You need to realize that there are going to come a time when the law is going to force you to switch to LED spotlights. And, then you aren’t going to have a choice. The problem is that when you are waiting until you must change your lights, it is going to become a lot more expensive.

This is because everyone is going to struggle to get these lights installed before the deadline. And, the result is that the prices are going to increase.

It uses less power than normal lights

If you still don’t know it, the LED spotlights are using a lot less power than normal lights. This means that your utility bills are going to be a lot less than with the normal lights that you have installed in your home at the moment.

They can take up to half the usage than the normal lights that people have in their homes. Just think what you can do with the money that you are going to save each and every month. See more.

You will be able to use it for a longer period than the normal lights

The great thing about the LED spotlights is that they don’t break as easily as the normal lights that you and I know about. They might be a bit more expensive, but you don’t need to replace these lights as often. Meaning that you are actually going to save money on purchasing lights.

There is no reason why you should purchase new lights every month if you can purchase it only every six months to a year.

Different colors and shapes available

There are a variety of colors and shapes available when you are going to install the LED spotlights. You can choose a color and shape that will fit into your home and design a lot better.

You don’t need to hide the lights anymore, like with the old, boring lightbulbs that you always have bought before.

There are different lights available for your home. There are some talks that the law is going to force people to purchase LED lights. This is because of all the benefits, and the fact that it is environment-friendly and that it uses less power. This is something to consider if you are looking for ways to save money. Everyone should really consider purchasing the LED spotlights before the law requires it, and then you are going to pay a lot more money for it. More details in site: https://www.larsonelectronics.com/ledlights.aspx

Continue Reading

All-Terrain LED Work Lights
Led Lights

Benefits of All-Terrain LED Work Lights in Rugged Environments

Industrial lights are deployed in rugged and rocky terrain, such as emergency camps and mining sites. Due to the uneven nature of such locations, it is crucial for the luminaries to be capable of adapting to various working conditions. This article dives into the advantages of all-terrain LED work lights for industrial applications.

Portable and Powerful

An all-terrain LED lamp is a heavy-duty unit with portable features. To address rocky terrain, the fixture comes with adjustable legs. During deployment, the unit can be setup securely on an uneven slope and does not require a flat surface for stability.

In some cases, the legs of the LED lamp can even be setup over shallow water, such as a flooded construction site. A waterproof enclosure may protect the internal components of the lamp from splashing, moisture and water spray.

Additionally, a telescoping pole is used to hold the LED lamp in elevated positions. This is advantageous for directing lights over large objects, such as boulders and generators.

Next-Gen All-Terrain LEDs

Making all-terrain LED spotlights as dependable as possible is the end-goal of lighting manufacturers and designers. With this in mind, battery-powered variants are applicable to remote locations without access to grid power. Solar panels may also be added to keep the power cells charged at all times with minimal effort.

Compared to gas-powered generators, batteries operate very quietly and without pollution. This allows the luminaries to be positioned close busy parts of the work site. With an all-terrain LED light, operators no longer have to setup the lamp at perimeters. Industrial locations with tight spacing requirements are known to use this type of LED lamp.

A battery-powered all-terrain LED unit also has less parts to maintain, as it incorporates a solid-state build. Gas-powered generators have loose parts that are prone to deterioration and replacement.…

Continue Reading

LED Panel Light
Led Lights

What is an LED Panel Light for Industrial Facilities?

Businesses have numerous options, when it comes to upgrading outdated or traditional lighting systems. These days, most companies are looking to improve illumination in the work site by adopting LED luminaries. Replacing fluorescent lamps with LEDs can be achieved using the LED panel light. The units are specifically designed for indoor settings, such as manufacturing floors, control rooms, commercial offices and schools.

LED Panel Light 101

LED panel lights feature a handful of unique properties for robust illumination. Comprised of three layers in its housing, the unit contains the LED chips, a light guide plate and a diffuser. A heat sink component may come with the light, which helps mitigate thermal fluctuations. It is important to note that LED panel lights may incorporate SMD LED chips to boost illuminative performance.

Most LED panel lights are constructed of lightweight aluminum. This helps operators install the fixtures in recessed configurations. The setup offers space-saving benefits for tight work spaces.

From a cost perspective, LED panel lights are less expensive to operate and maintain. The products are capable of meeting the standard 50,000+ hour expected lifespan of LEDs. Furthermore, the solid state lamps can withstand rough impacts better than filament-based luminaries, including incandescent units.

Applications and Considerations

Fluorescent lights are known for their accurate CRI ratings, which is highly preferred by businesses that specialize in product manufacturing, commercial paint spraying services, industrial labs and learning institutions.

Keeping this in mind, LED panel lights should be applied to similar applications.

The two main configurations during installation for the 12v LED lights are recessed mount and suspended ceiling mount. As mentioned earlier, recessed mounting is perfect for promoting a spacious workplace. Suspended ceiling mounts are suitable for overhead illumination over a general workspace or area. For low ceilings, operators can choose to install the unit directly on the ceiling (no suspension).…

Continue Reading

Led Lights

7 Things You Didn’t Know About Led Spotlight

Most cities have decided that, in the coming 3 years, to replace around 6,500 conventional lights with Ledspotlight. The reason for this is the main benefit of Led products which is the energy efficiency. Led spotlight can be 6 to 10 times more energy efficient than traditional ones. This might be old information for you, but what are the other things you didn’t know about Led spotlight?

Definition of the led spotlight:

It stands for Light-Emitting-Diode, which is an electrical component that lets electricity pass in only one direction.

The 1st Led spotlight was invented by Nick Holonyak Jr in 1962:

The first visible Led spotlight appeared in 1962 on the hands of Nick Holonyak Jr. while working for General Electric (GE). Found as a great invention for saving energy, more have been manufactured. The early Led were produced only in red lights. With the rise of their popularity, manufacturers started the production of coloured ones like green, blue and even white.

Led lights can be used for 20,000 to 50,000 hours:

Good quality bulbs can run, non-stop, for 20,000 hours, which is a bit more than 2 years, while high quality Led spotlight products have a non-stop useful life that can reach 50,000 hours, which amount to a bit less than 6 years. They are definitely more economical than traditional lights which can illuminate for around 1,200 hours.

Led spotlight waste less heat than conventional lights:

The efficiency of the spotlight is due to their low conversion of energy into heat; 80% of the generated power is transformed into light, and 20% into heat. In contrast, conventional bulbs convert around 80 to 90% of the energy into heat, and the remaining into the light. This transformation of energy makes Led spotlights and globes cooler than traditional ones. Read more.

Light-emitting-diodes don’t attract bugs:

One of the practical reasons to use this energy saving light bulbs is that they don’t attract insects as hot lights do.

Led spotlightis adopted for a different use:

With the energy saving light becoming more common, their use is now being multiplied for several purposes. The most popular use of these lights, other than the bulbs, is on computer monitors and TV screens. But did you know that they are also used publicly in traffic lights, vehicle brake lights, billboards and others?

Led spotlight are environmental friendly:

The benefit of led spotlight globes and spotlights affects your electricity bill. It can help you economise around 30% of the money spent on electricity. On another hand, LEDs are known for being environmentally friendly. The use of non-toxic substances makes them harmless to nature. No damaging gazes are being discharged into the open air.


Briefly, led spotlight products can be today’s best choice of lighting on many levels. However, you have to be careful when purchasing from Led spotlightstores or manufacturers. It’s been noticed that many of them are giving wrong information about their products leading the buyers to purchase deceitful products. For more information visit: http://www.larsonelectronics.com



Continue Reading

induction lights
Led Lights

LEDs vs Induction Lighting for Industrial Work Sites

LEDs are currently top choice for lighting system upgrades in rugged facilities. As a lighting technology that is setting the standard for the sector, when it comes to performance and illuminative output, it is expected its position will be challenged by engineers and lighting manufacturers.

In the past few years, upgrades to induction lighting have made it more viable for applications that require persistent illumination. Like LEDs, the lamps come with an impressive lifespan of 50,000 – 100,000 hours. Moreover, it can retain lumen output at 70 percent after 60,000 hours.

No Electrodes, No Problem

Induction lighting fixtures utilize gas (like a fluorescent unit) inside the bulb for illumination. The main difference between the two lighting technologies is the use of electrodes. Traditionally, fluorescent luminaries rely on electrodes to kick start current inside the lamp. Continuous striking of the arc contributes to wear and tear over time.

By comparison, induction lights do not use electrodes to initiate a current during startup. Instead, the units leverage a generator (high frequency) and a power coupler. A radio frequency magnetic field is generated, which is used to activate the internal components of the fixture.

Comparing Light Output

Like LEDs, induction lamps can be toggled instantly without flickering. Moreover, the units provide accurate CRI ratings, at a range of 80+. This allows the fixtures to be used for detailed tasks and paint spray booths (Class I, Division 1 or 2 required).

Comparing energy efficiency rates, induction lights offer roughly 90 lumens-per-watt during illumination. LEDs perform slightly higher than this at a rate of 120 lumens-per-watt, when in use.

To conclude, LEDs clearly outperform induction lamps – but not by a wide margin. However, the nascent state of LED technology suggests there is plenty of room for improvements and upgrades. The gap between the performance of LEDs and incandescent lights or metal halide fixtures is considerably larger.…

Continue Reading

work lighting systems
Led Lights

What are Light Reflectors in Work Lighting Systems

Buildings and office spaces incorporate different designs, based on the illuminative requirements of the business. Because of this, work lighting systems should be customized to effectively cater to the unique layout of the space.

An effective way to ensure all sections of the work site are adequately illuminated is to utilize light reflectors. The components, which come in various sizes and shapes, are usually included in the design of the luminary. Understanding how reflectors work inside directional light sources, such as LEDs, and omni-directional luminaries, including incandescent bulbs and metal halide lamps, can help operators optimize lighting configurations in the area.

LEDs and Light Reflectors in Work Lighting Systems

LEDs may incorporate one or more secondary optics to extend or position light beams directly at the target. Reflectors inside LED lamps surround the diode or chip (depending on the type of LEDs). The material must be shiny and uniform in order to ensure smooth lighting effects. As a directional light source, reflectors are not crucial components for LEDs, since most of the light beams exit the lamp without requiring help from reflective surfaces.

It is important to consider that incorrect usage of light reflectors can lead to unwanted glare. When it comes to materials, LED reflectors are typically constructed of plastic or metal.

Tips and Recommendations

Light reflectors are cost-effective solutions for maximizing light output. As mentioned earlier, omni-directional light sources can benefit from reflectors, because they emit light in all angles. However, they are not suitable for compact installations in tight spaces, as reflectors tend to take up a lot of space in the luminary.

To prevent damaging reflectors, it is recommended for the housing and lens to be constructed of sturdy materials. Moreover, water-tight enclosures could help reduce the buildup of tiny droplets inside the unit, which could negatively affect light distribution during illumination.…

Continue Reading

led lights
Led Lights

What colour temperature LED should you buy?

Led spotlights come in two colour temperatures as standard; warm white and cool white. Understanding the difference between these two types of light and their suitability for certain applications is an important part of the buying process and will ensure complete satisfaction.

What is a colour temperature?

Unsurprisingly, when it comes to artificial illumination, there are many different “types” of light. Many people recall that when Compact Fluorescent Lamps (CFLs) were first introduced to homes there were many complaints that the light seemed much “colder” than traditional halogens. This is because they had a different colour temperature.

Colour temperature is one of the main characteristics of visible light and determines how warm or cold the light is. All colour temperatures are assigned a number called a Kelvin Rating. Colours with lower kelvin ratings are generally warmer while those with higher kelvin ratings are cooler.

Warm led spotlights colours are very soft with a slightly yellowy tint and are a close, but not perfect, replication of traditional halogen bulbs. Cool colours are very bright with a faint blue tint and are sometimes compared to the light given off by fluorescents.

Which works well where?

While colour temperature is a largely subjective matter and many customers have personal preferences to satisfy, there are a few “rules of thumb” which can help you to decide.

Due to its softness, Warm White is generally better for creating ambient/general light schemes. It is also good at promoting a relaxing and comfortable environment, so should also be used in “habitat” or “living” spaces. These may include the living room, bedroom, hallways or dining room. See more

Colour temperature – or simply what colour led spotlights will the bulb put out.

  • Pretty straightforward answers here:
  • Warm White is an ideal match to traditional Halogen bulbs/incandescent bulbs and produces amore warmyellow light with a colour temperature 3200K (probably the one most people are used too)
  • Pure White produces a white light which is often used in commercial environments or to create a very modern look with a colour temperature of 6500K.
  • You may find when looking at your products online that they quote a figure as above showing a high number with a K at the end, this is just the colour temperature output in the unit Kelvins (K). Some websites will show you a pretty chart with the colour temperature range from warm white to cool white along with the Kelvin scale, quite useful as it shows you what the output is likely to be (see above).
  • Cool White is more commonly used in public spaces, such as offices and shoppingcentres. It has a tendency to be too bright for general illumination, resulting in a room aesthetic that is too clinical for some. However, it is not uncommon to find this type of light used in kitchens and bathrooms as it works well with reflective and pearl surfaces. Feature and task lighting also benefit more from the brighter cool white, particularly as it helps to promote alertness. If you have a home office you might consider using it in there to help you concentrate.

Using the two colour temperatures in combination with one another can sometimes create quite spectacular results. You will find this, particularly with “layered” or “dual purpose” light schemes. For instance, in an art gallery, warm white would be used to create soft background ambience while cool white led spotlights could be used to highlight artwork.

See more this site: http://www.kandeferplumbing.com/using-leds-preserve-artwork-illuminate-museums/


Continue Reading

Led Lights

Using LEDs to Preserve Artwork And Illuminate Museums

Powerful LEDs are revolutionizing the way museums operate and maintain expensive artifacts. The luminary’s compact size and non-invasive properties allow curators to illuminate artwork in the building without affecting sensitive elements. By comparison, some traditional light sources emit harmful UV rays, which could cause discoloration on paintings, when exposed for long periods of time.

Keep reading to understand how museums leverage LEDs for illumination, inspections and preservation.

Narrow Spotlight Configurations

When illuminating a small artifact on display, curators typically use very narrow spotlights, suspended in the air or mounted very high on the ceiling. The narrow beam stays tight and focused, as it lights up the piece. Narrow lighting configurations are preferred, because of their ability to keep beams within a specific range, without affect nearby paintings. Furthermore, it keeps the general area dim, maintaining a comfortable ambiance for conversations and discussions.

Utilizing a wide flood beam to illuminate multiple pieces on a wall is not recommended, as it could cause unsightly glare – especially if the light source is very close to the wall (and if the color of the wall is bright). Flood beams would be an exception for very large museums, focusing on very large pieces (such as a dinosaur statue) or for dark-colored walls.

Detecting Inconsistencies (Infrared Light)

Behind the scenes, museums curators rely on infrared LED to streamline the detection of inconsistencies, origin of artifact and fraudulent applications. For instance, infrared light could be applied to uncover hidden touch ups in old paintings. In other industries, like law enforcement, infrared LEDs are also being used to detect counterfeit banknotes.

To conclude, the advantages of LEDs have made museums more efficient, authentic and grand. Without needing to invest in costly UV filters and outdated fixtures, such establishments could improve the overall mood and experience of viewers in the area.…

Continue Reading